The AlcoScan Premium model AL7000 breathalyzer is the newest of all breathalyzers that offers a field replaceable and pre-calibrated sensor module. The AlcoScan AL7000 (also called Alcomate Premium) is suitable for health and law enforcement professionals, as well as individuals seeking for simply the best personal breathalyzer.

Field Replaceable Sensor
The AL7000 Field Replaceable Sensor Technology guarantees unit readiness in remote field testing situations such as maritime and military applications. The Sensor module stores all calibration parameters in its non-volatile memory.

Calibrate It Yourself
The AlcoScan AL7000 sensor replacement has been further simplified by designing the sensor module in an accessible sensor chamber. Open the rear chamber door, pop the old one out and drop in a factory pre calibrated sensor, as simple as changing batteries.

Extend Your Breathalyzer Life
With the user replaceable sensor technology, you always replace the old sensor with a new factory calibrated sensor. This will dramatically extend the life and usability of your investment. The AL 7000 is the only breathalyzer in the market that offers factory calibration accuracy in the field without wasting time and money to send in for re calibration.

• No Calibration Required!
• Easy Access and Replacement of the Sensor Modules
• DOT/NHTSA Approved
• FDA 510(k) Pending
• Large 4-Digit Decimal Display (0.000%)
• Active Pressure Sensor
• Deep-Lung Air Sampling
• Cumulative Test Counter
• Audible Alerts / Low Battery Indicator
• Auto Power Off
• Extended Mouthpieces
• Self-Diagnostic with Error messages

Like any other analytical instrument, breathalyzers require periodic calibration to ensure their accuracy. Our pre-calibrated and field replaceable sensor module is a patent pending technology built in our new generation of breathalyzers that has resolved all problems and complications arising from otherwise existing calibration processes.

Calibration of a breathalyzer is a compensation for deviations in a sensor due to contamination and aging. The calibration process does not remove contamination but it makes up for any deviation of BAC step thresholds levels from previously calibrated levels.

Our experience has shown that multiple calibrations of the same semiconductor sensor eventually leads to failure and sensor replacement is required. This has been the main problem with using breathalyzers in critical applications. Unfortunately, the calibration process requires that the breathalyzer be physically mailed or taken to a professional service center, at which point the device must be evaluated and proper steps must be taken for calibration with an expensive breath alcohol simulator system. The process is costly for both consumer and the service center, not to mention the delays involved in processing and shipping back-and-forth that can be quite a loss.

The pre calibrated and field replaceable sensor module has eliminated delays and complications of a calibration process by allowing users to simply "snap out" an old sensor module and "snap in" a new module. Restoring accuracy to AlcoScan AL7000 takes a matter of seconds and it only costs $29.95 for each sensor module. This will restore the unit accuracy back to its condition as new from the factory.