| |
AlcoMate Prestige Alcohol Breathalyzer
With Pre-Calibrated and Field Replaceable Sensor Module
|
AlcoMate Prestige with 3 decimal points accuracy is an advanced professional alcohol breathalyzer equipped with "Modular Sensor Technology".
AlcoMate Prestige comes with an innovative and patent pending technology that allows users to re-calibrate their breathalyzer without the need for shipping their device to ASD for calibration as often as every 6 months to a year. The Prestige users themselves can now swap the sensor module with a factory pre calibrated module and save not only on cost but more importantly they eliminate the risk of being without their breathalyzer while it is out for calibration.
The sensor swapping is an ideal solution for all users specially for clinical users, field officers, or for devices on board a vessel in the open see. Now vessel operators and clinics can have their always ready and always accurate alcohol testing device.

|
 |

|
Pre Calibrated & Field Replaceable Modular Sensor Technology
Patent Pending
|
What about "Pre-Calibrated field Replaceable Sensor Module"?
AlcoMate Prestige is the first breathalyzer that offers pre-calibrated and field replaceable modules (patent-pending) in the market. One of the main problems with using breathalyzers in critical applications is that the alcohol sensor requires periodic re-calibration. Unfortunately, the re-calibration process requires that the breathalyzer be physically mailed or taken to a professional service center. The process is costly for both consumer and service center, and the delay of processing and shipping back-and-forth can be quite a loss. The Pre-Calibrated Replaceable Alcohol Sensor Module can eliminate the delays and complications of re-calibration by allowing a simply "snap out" an old module and "snap in" a new one. This way, you can get back to reliable and accurate testing in a matter of few minutes!
|
Special Features
- Replaceable Sensor Module
- Active Pressure Sensor
- Deep-Lung Air Sampling
- Cumulative Test Counter
- Low Battery Indicator
- Auto Power Off
- "One-Way-Flow" Mouthpieces
|
 |
Full Kit Package Contents
- AlcoMate Prestige Unit
- A Practical Carrying case
- Carrying Pouch
- 8 Mouthpieces
- Hand Strap
- 2 AA Batteries
- Retail Box
- User's Guide
|
Meets the US Coast Guard Requirements
AlcoMate
Prestige is highly recommended for maritime applications due to availability of the pre calibrated sensor module. |
In Stock
Ordering Information |
|
| |
|
|
| |
|
|
| |
|
|
Single
(Basic Kit) |
$129.95 |
|
|
|
|
| |
3-Pack
(Basic Kit) |
|
|
|
|
|
| |
6-Pack
(Basic Kit) |
$589.95 |
|
| |
| |
| |
|
| |
|
|
| |
Single (full Kit) |
$149.95 |
|
| |
3-Pack (full Kit) |
|
|
| |
6-Pack (full Kit) |
$649.95 |
|
| |
|
| |
AlcoMate Prestige Replacement Sensor
IMPORTANT NOTE:
There are two uninterchangable sensor modules for
the Alcomate Prestige. Please read the followings
carefully before you order any sensor.
To order
a correct sensor for your previously purchased AlcoMate
Prestige, please watch out for the color of your old
sensor's circuit board. Order the right color
to ensure compatibility. Sensors with green circuit
board work with all Prestiges sold prior to December
2007 and sensors with a red circuit board work for
all Prestiges sold after December 2007 including any
new Prestige you are buying today.
This requires
that you first identify the version of the sensor
in your previously purchased AlcoMate Prestige before
you order any replacement sensor module. If you are
ordering an AlcoMate Prestige for the first time you
must order the "Red Sensor". For further
assistance, please call us toll free (866) 216-8700
or (818)701-9210 from outside The USA.
|

2007 version |
1
Unit |
$29.95 |
 |
| |
2
Unit |
$54.95 |
 |
| |
4
Unit |
$99.95 |
 |
| |
| |
|
|
|

2008 version |
1
Unit |
$29.95 |
 |
| |
2
Unit |
$54.95 |
 |
| |
4
Unit |
$99.95 |
 |
| |
| |

Disposable Mouthpieces |
Mouthpieces |
$.37 |
 |
|
|
|
100 |
$34.95 |
 |
|
|
|
1000 |
$299.95 |
 |
| |
|
|
How To install a Pre-Calibrated Sensor Module?
Take the following steps to install a new sensor module
 |
 |
 |
| |
Prepare
your AlcoMate Prestige. |
|
|
Use
a flat, sharp tool to carefully open the top cover.
|
|
|
Lift
the breath tube to access the sensor module. |
|
| |
|
|

|
|
 |
| |
Remove
the breath tube. It should remove easily |
|
|
Carefully
raise the sensor module from the body. Do NOT
detach the cable from the body. |
|
|
Remove
the cable from the slot underneath the sensor
module. |
|
| |
|
|

|

|
 |
| |
Prepare
a new pre-
calibrated sensor module |
|
|
Insert
the cable into the new sensor. Make sure the blue
strip is toward the sensor, as shown. |
|
|
Replace
the sensor module into its original position.
|
|
| |
|
Ready
for Testing! |
 |
 |
| |
Re-attach
the breath tube directly on to the sensor. Make
sure the front opening is aligned. |
|
|
Re-attach
the cover on to the top of the body. It should
snap in fairly easily. |
|
|
|
Technical Specifications
- FDA 510(k) Approved
- NF/CE Mark
- DOT/NTHSA Approved
- Pre calibrated field replaceable sensor technology
- recovery Time 20 Sec
- Meets US Coast Guard Requirements
- Accuracy: +/- 0.01% at 0.10% BAC
- batteries included
- Deep-lung air sampling system
- Pressure sensor system
- One-way air mouthpiece
- Auto Power-Off
- 1 year warranty
|