| |
 AlcoMate Professional - DOT Approved Breathalyzer
The AlcoMate Pro improves upon the AlcoHawk Pro by taking a deeper lung-air sample (5-sesc), allowing for more precise measurement of blood alcohol concentration (BAC). The AlcoMate Pro uses the same sophisticated alcohol sensing technology as AlcoHawk Pro, but provides a higher level of accuracy and sensitivity expected by the industry professionals and consumers who seek the best in performance and reliability.
|
|
Full Kit Contents |
|
|
- AlcoMate Pro unit
- Car Adapter
-
Hard Case
- 9-volt Battery
-
2 Mouthpieces
-
Hand Strap
-
User's Guide
|
 |
$139.95
|
| |
| |
Basic Kit Contents |
|
|
- AlcoMate Pro
-
Carrying pouch
-
2 Mouthpieces
-
Hand Strap
-
User's Guide
|
|
$129.95
|
| |
| |
| |
|
| Accessories |
|
|
|
|
| DC Wall
Adapter |
$15.95 |
| |
|
| |
|
| ASD offers routine calibration and maintenance service |
| Calibration
Coupon |
$35.00 |
|
| |
| |
| |
Mouthpieces |
$.37 |
|
| |
|
|
| 100 |
$34.95 |
|
| |
|
| 1000 |
$299.95 |
|
|
FlowCheck Technology
The AlcoMate pro now includes innovative FlowCheck technology. An important aspect of breath testing is ensuring that subjects blow a large volume of air through the tester. FlowCheck will verify that enough air has been blown through the AlcoMate Pro before displaying a test result. If the FlowCheck engages and recognizes that not enough air was blown, an error message "ERR" will be displayed and the test should be repeated. Because the AlcoMate Pro measures the amount of alcohol in a subject's deep lungs air, a longer breath sample of 5 seconds provides more accurate test results.
One-way-Air Flow
The AlcoMate Pro features a "one-way-flow" disposable mouthpiece which prevents fresh air inhalation. Negative blow or fresh-air- blow can both severely undermine test accuracy. |
| |
|
Features |
Benefits |
| Government Approvals
|
DOT / NHTSA and FDA |
| Highly Selective Sensor |
Latest in the silicon-oxide semiconductor
sensor technology |
| 5 Sec Blowing Time |
Deeper breath samples, better accuracy |
| Stable Testing Data |
Consistent readings for successive testingl; repeatable |
Ultra Bright LED Display
|
Visible at night and dimmed places |
| Wide Detection
Range |
0.00 ~ 0.40% BAC or 0.00 ~ 2.00 BRAC |
| Short Warm-up & Response
Time |
Less than 20 sec |
| Quick Recovery Time |
Ready in 25 seconds for next time testing |
| Sanitary Testing |
Includes extended one directional mouthpieces |
| Alarm Sound |
Audible warning when exceed legal limits |
| Versatile Power Source |
Uses 9-Volt Alkaline batt. or car cigarette
lighter
|
|
| Specifications |
|
| Size |
120 x 60 x 25 mm |
| Weight |
200 grams |
| Housing |
Shock resistant, molded plastic |
| Sensor |
Highly selective semi-conductor alcohol sensor |
| Response time |
3 sec. |
| Warm up time |
20 sec. |
| Recovery time |
30 sec. |
| Battery life |
Over 300 tests |
| Battery type |
9V alkaline |
| External power supply |
12V DC adapter or a 12V DC /300MA wall
power adapter |
| Accuracy |
±0.01% at 0.10% BAC ¥±0.05mg/liter
at 0.50mg/liter BRAC |
| Detection range |
0.00 ~ 0.40% BAC 0.00 ~ 2.00 mg/liter
BRAC |
| Calibration |
BAC simulator (Model 34C/Guth Laboratory,
USA) |
| Digital
display |
Ultra bright three digits numeric seven
segment display |
| Warranty |
1 year |
|
