Product Description
The CAT PPSCL3 is a multi-function power station that packs four essential tools into one compact unit. With 1750 peak amps of jump-starting power, it can instantly revive dead batteries in 12V cars and trucks with up to 8 cylinders. The included heavy-duty cables ensure a secure connection during jump-starting. When you need AC power, the station provides 200 watts to keep your small appliances, tools, and electronics running, perfect for emergencies or outdoor adventures. Two USB ports allow you to conveniently charge your smartphones, tablets, and other mobile devices. But that's not all! The built-in 120PSI air compressor inflates car tires and sports equipment with ease, and the included sports needle adapter expands its versatility. For added safety, the compressor features a new 10-minute auto shut-off timer to prevent accidental overheating.
Features
- Rechargeable lithium jump starter helps to get 12V vehicles going without the need for another vehicle
- 120 PSI air compressor to inflate tires and sports equipment
- 120V AC outlet provides 200 watts of household power
- USB Port Type- A and USB Port Type - C to power and charge digital devices and more
- Bright LED light provides illumination in dark environments
Specifications
| Boost Ampere: |
1750A Max |
Battery Type: |
Lithium polymer, 11.1V DC |
| Input: |
5VDC 3A / 9VDC 3A / 12VDC 2.5A / 15VDC 2A / 20VDC 1.5A (PD 30W) or 5VDC 2A |
Compressor: |
120 PSI (max.) |
| USB-A: |
VDC / 9VDC / 12VDC, 15W MAX. |
USB-C: |
5VDC 3A / 9VDC 3A / 12VDC 2.5A / 15VDC 2A / 20VDC 1.5A (PD 30W MAX.) |
| USBs Used Simultaneously: |
5VDC, 15W MAX. |
120V AC Power Outlet: |
120V AC, 60Hz, 200W |
| Weight: |
4.8lbs |
Dimensions: |
7.36”L x 7.48”W x 8.26”H |
Package Contents
- CAT PPSCL3 unit
- USBa/USBc and USBc to USBc charging cables
- Jump cables with Smart Controller
- Storage pouch with Velcro closure
Frequently Asked Questions
PPSCL3 not charging?
Make sure all of the unit’s functions are turned off. Check the connection to the power source. Confirm there is a functioning power source. The unit may have shut down to protect the battery from overheating after a long period of operation or charging, or too cold (the ambient temperature has dropped below 0°C). Disconnect the USB charging cable from the unit and power source. Allow the unit to cool down or warm up for a period before resuming charging.
Engine fails to jump-start with PPSCL3
Check that all the unit functions are all turned off.Make sure a proper polarity cable connection has been established and the Bi-Color Booster Status Indicator on the Smart Cables Controller lights green. The unit may be in over-current / over-time protection. Remove the clamps and restart after a cooling down period of approximately 30 minutes. The unit may be overheated due to the excessive engine cranking. Make sure all the unit functions are turned off and allow the unit to cool down before resuming operation. The vehicle battery may in fault condition and cannot accept starting assistance. The manufacturer recommends taking it to a certified automotive service center for evaluation. Check that the unit has a full charge. Recharge the unit if necessary.
Portable Compressor on PPSCL3 will not inflate
Make sure the Compressor Power button has been pressed to turn the compressor on. Make sure the unit is not being operated in the Jump Starter mode. Make sure the Sure Fit® nozzle is securely screwed on to the valve stem when attempting to inflate tires or that the nozzle adapter is securely screwed into the Sure Fit® nozzle and is inserted properly into the item to be inflated on all other inflatables. The battery of the unit may overheats or is too cold. Allow the unit cools down or warm up before resuming operation. Check that the unit has a full charge. Recharge unit if necessary.
LED Area Light does not come ON
Make sure the LED Area Light Power button has been pressed to turn on the area light. The battery of the unit may overheats or is too cold. Allow the unit cools down or warm up before resuming operation. Check that unit has a full charge. Recharge unit if necessary.
USB Power Port will not power appliance
Make sure an USB-A powered device connected to USB-A port or an USB-C powered device connected to USB-C port. A fault condition exists in one of the USB Ports. Refer to the Important Notes in the “USB Ports” section to remedy any faults. Make sure the USB device plugged into the USB-A port does not exceed 15W. The USB device plugged into USB-C port does not exceed PD 30W or the total drained power of the USB-A port and USB-C port do not exceed 15W when they are used simultaneously. Some USB-powered household electronics will not operate with this USB charging/power port. Check the manual of the corresponding electronic device to confirm that it can be used with this type of USB charging/power port. The battery of the unit may overheats or is too cold. Allow the unit cools down or warm up before resuming operation. Check that the unit has a full charge. Recharge the unit if necessary.
120 Volt AC outlet will not power appliance
Make sure the AC Power Button has been pressed to turn the AC outlet on. Make sure you have followed all the steps in the “120 AC Power Outlet” section carefully. Refer to the important notes included in that section that
explain common problems and solutions. Make sure the combined draw of the appliance being powered is not more than 200 watts. The battery of the unit may overheats or is too cold. Allow the unit cools down or warm up before resuming operation. Check that unit has a full charge. Recharge unit if necessary.
